Rover R710
code entry
After switching on the radio will display ROVER followed by CODE. Press station preset 1 and enter first code digit using station increment/decrement keys. Follow the same procedure for the remaining three code digits, finally pressing preset 1 once more to enter the code.
deactivating the code
Switch the set on while holding in the station increment key. The display will show CODE. Enter the code as above and the set will turn on. The code is now off.
reactivating the code
Press and hold the station increment key while switching on. Release the on/off switch and ROVER will be displayed. Release the station key and the set will operate.
| 
