Kenwood KDC-PS909
code entry
ENTER will appear on the display for one second, indicating the code setting mode has been entered.
When CODE appears in the display you can start inputting the code. Press the [preset] button and enter the security code - use the security code shown on your Car Audio Passport.
For example, if your code is 3510, press the buttons as follows:
- To enter 3: Press [preset] button No 1 four times (displayed numbers start at 0)
- To enter 5: Press [preset] button No 2 six times
- To enter 1: Press [preset] button No 3 twice
- To enter 0: Press [preset] button No 4 once
Hold down the [disp] button; APPROVED will appear in the display.
if the wrong code has been entered
If you enter the wrong code, WAITING is displayed and you cannot make another attempt to enter the code for a fixed period of time (which grows longer with each unsuccessful attempt). When CODE is displayed you can try again.
- First wrong input - retry immediately
- Second wrong input - wait five minutes
- Third wrong input - wait one hour
- Fourth wrong input - wait twenty-four hours
- Fifth wrong input - send to Blue-ICE for reprogramming
removing the unit
First, remove the hard rubber frame as follows:
Insert the removal tool (the 'release key' - see the link on the right if you need to purchase) deeply, with the cut placed to the right to remove the upper locks at an angle as shown.
Engage the catches on the removal tool and remove the two locks on the lower level, leaving the removal tool inserted on the upper level, leaving the removal tool inserted on the upper level. Lower the frame and pull it forward as shown in the figure.
NB you will feel (not hear) a click when the tabs lock securely.
Remove the hex head machine screw with washer on the back panel.
Insert the two removal tools at an angle and push them deeply into the slots on each side, as shown:
Push downwards on the left-hand tool and upwards on the right-hand tool, as shown, and pull the unit towards you until it is halfway out. The unit may drop if you pull it out completely
NB Be careful to avoid injury from the catch pins on the removal tool.
Pull the unit all the way out with your hands, being careful not to drop it.
| 
